Snapshot bug in 2.0.1

Strange phenomenon in v2.0.1 - possibly a bug with recall of snapshots.

Scenario - I set a zoom level and some column widths on the Playback Status display, and record a snapshot including displays. I then make changes to the Playback Status display or move it to another monitor. If I then recall the snapshot that I just recorded, it brings the PSD back onto the screen it should be on, but at the wrong zoom level and incorrect column widths. Triggering the same snapshot for a second time restores the recorded zoom level and column widths.

This happens whether the PSD is on an integral touchscreen or an external monitor.

It's possible to work around this by firing a snapshot twice - but I guess it's a bug which needs looking at.

gareth71 over 12 years ago

Hmm. This also happens across a power-cycle ... I recall the recorded snapshot (twice!), the PSD is displayed with the correct zoom level and column widths, I power-cycle the desk, and the PSD returns to its 'default' zoom level and column widths. Firing the snapshot again corrects the display.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
ueliriegg over 12 years ago in reply to gareth71

With a magic sheet tab you sometimes need to recall twice. Once brings back the right tab, the second time you get the right view.

But there is some snapshot work being done anyway, so I guess this will be gone soon...
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Jason1032 over 12 years ago in reply to ueliriegg

I just figured that snapshots didn't store where you were in a given MS, the same way they don't store which channel page you are on. It didn't occur to me to trigger the snapshot twice - since I trigger snaps with macros, I just wrote a second line to trigger a specific MS view.

Glad to hear that's going to be dealt with.

-Jason
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel