in the new Colorsource Update 2.5.0 my Console is doing Strange things.
Pleas look up the Video.
Did you create this showfile from New in 2.5? Or is it from a previous version?
With version 2.5, all shows using UV will need to be recreated due to the color engine changes that bring UV out of the beam category into the color category.
Yes I Create it New.
Can you please send me your showfile? or Post it here?
I've testet allot with new patches and shut down the console and it's strange. Sometimes the button lights are working normally, sometimes they won't. But the color engine is still doing strange things.
Are we mainly talking about the color in the physical channel buttons? Or do you also see problems in the mimic color in the Stage Map?
Please send us your show file so we can try the same setup here.
For me, I confirm , the strange things with the physical buttons, (selection and colors ) I already told you. About the stage Map, It is more in line with reality.
Can you give us a specific example with a device from the standard library that we can try out here?
I try to make you a video with the standard library... But I don't understand the relationship between the library and the selection button, and not either the button colors.
The standard library personalities have more detailed information about the specific color mix (and the actual colors) than fixtures you create yourself with the personality editor. The Stage Map mimic colors and the color in the bump buttons are calculated based on this information. This is why the standard library is different (and better).If you have a specific personality from the library, please let us know the exact type and problem so we can reproduce it here.
Could you give us some examples of personalities in the standard library that misbehaves?
PS. We have found a special case for personalities with a single Intensity parameter (which is essentially a dimmer) where the bump selection indication isn't working. Could this be a part of your problem?
In this exemple, there is also a strange behavior.
- On the channel 27-28-29-29 and 37-38-39-40, the same effect with three color.
On the screen an on Capture it looks normal
But the selection button, are not synchrone , and the blue (27 and 37) are completely asynchrone and not full illuminated.
And the 28-28-30 and 38-39-40 button are not blinking !
- Another thing I've noticed for a long time is that the action of the physical buttons (even the touch screen) is not always taken into account, and that's annoying. And it's not a question of push strength, but of software latency.
Is there not possibility to reduce this latency ?
Have a good day.
Thanks. Can you attach your show file? We need to see what device types you are using.
Are the personalities from the standard library or custom made?
In general, we still need information from you about the personalities you use.
No all devices are made with the personality editor.
Here is the show file :
SLMLO 2018 V2.zip
Thanks. I will have a look.
I notice that you have 22 different device types. Are all these devices missing from the standard library so that you had to create them in the personality editor?