Good Day all,
Just wondering if anyone had developed/coded a simple Arduino project that took an osc signal on a ESP8266/NodeMCU and displayed the current cue number and upcoming cue number on a small oled/lcd display?
I have not delved into coding etc, and not sure how to start to implement the handshake to the EOS to start receiving this values and then display them on a screen.
My idea is these small boxes could sit at SM, Followspots anywhere cue list info would be handy.
Even possible to simply display messages at certain points in a show etc - maybe a cue Label from another cue list...
Cheers for any advice/info/places to start.
There are some small ESP32 Boxes on the market https://m5stack.com or other on AliexpressYou will find the OSC library on https://github.com/CNMAT/OSCOver WLAN there is no handshake needed, but you need a powerful router.Getting the data you will find infos in the EOS manual.e.g. /eos/out/active/cue/text for the aktive cue/eos/out/pending/cue/text for the next cueFor programming environment https://platformio.org is very good.