Arri Skypanel Fan Control?

still in mode 6? there is a Cooling Fan parameter. it's part of the color category

i'm Not seeing it in the color category?

are you looking in a ML Control Tab (tab 5) or on the encoders?

yes I am, still don't see it is it because i am using v.2.4. all I see is RED, Green, Blue, White, Hue, Sat/ Color Temp, Tint. no fan control.

Yes i am looking at ML Control Tab (tab 5) and the encoders

have you created this showfile with skypanels on an older version of the software?

No, but it seems I need to update to v2.5 on the ion. Thanks for your help

just be aware, that if you're in a multiconsole environment, all desks need to run the same software to be able to talk to each other

just be aware, that if you're in a multiconsole environment, all desks need to run the same software to be able to talk to each other

The original 2.4 library for the SkyPanel did not have fan control in the light's profile. I made a custom profile to address this, but I believe the newest/last fixture library for 2.4 also updates the light's profile to have fan control--this is easier to see in the ML Control buttons.

loaded up 2.5 and the fan control was only in Mode 2,3,4,5,7,8,9,10,11,12,13,14,16 not for mode 1, 6 or 15. What mode do you usually use?

If you tested this with the same showfile, you need to go to patch ,fixtures, move to your mode 6 and press UpdateLib

Mode 6.