ColorSource Linear 2 Patch

Hi guys,

I'm trying to patch a ColorSource Linear 2 in my Nomad. I don't have the fixture with me yet so I'm not able to make any tests. 

The CS Linear manual says the fixture can be used in Cell Mode Direct to control it cell independently. This mode will need 12 DMX addresses. However when I patched this fixture (CorlorSrc Linear 2 Cell Direct) it only took 6 DMX addresses. Besides when I select the channel I can't see at the ML controls screen any option to control each cell independently. 

I noticed there is a small D letter in the Type fixture screen. Is this related to my problem.

PS: Sorry for my poor english! :)

2 Replies - Page 1 of 1

  • I forgot to mentioned I'm using ver 2.6.3.9.0.2
  • In reply to Ezequiel52125:

    you're not doing anything wrong, it's because of the library. this will change in the future. but for now you can do this:

    because the Linear has always 50cm cells your Linear 2 (2 meters) has 4 cells. you can patch your one fixture as 4 channels. and patch each of your channels as a single linear.

    this way you will get a color picker for each section of your linear.
Page 1 of 1
Related