Skypanel S60 Color Home Referencing Bug

In the newest fixture library for 2.7, when you home a Skypanel S60 in Mode 6, RGBW values are at full, the head is outputting white light but the color reference in Color Picker is Purple. 

 

They changed the profile from 20 addresses to 18 addresses in 2.7, removing two null parameters. The profile for S30 remains at 20 addresses and there's no issue with that. 

 

This is a very serious issue as the color referencing throws off programming a very popular light in film.

Running 2.7 ion, and 2.7 nomad

Facebook discussion post: www.facebook.com/.../

Thanks in advance.

Parents
  • Hi Andrew,

    It appears that the ColorPicker on the EOS requires the Skypanel to be in a Direct Color Mode, as opposed to Calibrated Color Space in order for it to track properly.  Arri developed its Calibrated Color Space to make fixtures across the range match one another regardless of bin and operating temperature differences.  It also allows you to set a custom white point (beneath the color).  I assume the EOS color picker uses more of a "raw" structure to average across fixture manufacturers.  I just tested a SkyPanel in direct color mode and it appears more accurate.

    [Menu] - {Light Control} - {RGBW Color Space} - {Direct Control}

    Hope this solves it for you.

Reply
  • Hi Andrew,

    It appears that the ColorPicker on the EOS requires the Skypanel to be in a Direct Color Mode, as opposed to Calibrated Color Space in order for it to track properly.  Arri developed its Calibrated Color Space to make fixtures across the range match one another regardless of bin and operating temperature differences.  It also allows you to set a custom white point (beneath the color).  I assume the EOS color picker uses more of a "raw" structure to average across fixture manufacturers.  I just tested a SkyPanel in direct color mode and it appears more accurate.

    [Menu] - {Light Control} - {RGBW Color Space} - {Direct Control}

    Hope this solves it for you.

Children
No Data
Related