OSC double triggering (touch OSC)

I can't open your file on google drive. It is asking for a specific email address to gain access.  What are the addresses and messages you are transmitting.  I have used both TouchOSC and Lemur for years without issue for pressing buttons and passing commands to the eos consoles.  I would suggest taking a look at the show control section of the manual for examples of useable OSC messages.

Hi Druuka,

Thanks for your reply. No problem about opening the file. I found a template another user had posted and that works fine. I have now tested my template on a different computer and it is now working as expected with no double inputs. Very strange.

Basically I had mapped the physical keyboard to osc to enable quicker programming I used this pdf found in this post.

Basically when hit the 1 button on my template it was sending out

/eos/key/1

/eos/key/1

So the software was returning channel 11.

Likewise with those keys which have multiple functions based on the number of times pressed, they were registering as being pressed twice.

I can only assume that as I was using various different osc applications at the time for monitoring and troubleshooting that I had somehow managed to create some crosstalk in some way.

Thanks again

TouchOSC always* sends out two OSC commands for each button press - the 'press' and the 'release'.

For most buttons, you need the "press" to send the value "1" and the "release" to send "0", as otherwise you're telling the console that you pressed the button twice (maybe at two different speeds, like piano keys)

* At least, it did when I last used it.

I set in touchosc to only send on press, but it still sent twice. Is this what you mean? If not how do I set touchosc to send 0 on release?

Have a look for the examples at https://github.com/ETCLabs/OSCLayouts
Here a screenshot for an key example:

Have a look for the examples at https://github.com/ETCLabs/OSCLayouts
Here a screenshot for an key example: