Kino Celeb250 colour temp not matching from ION console to fixture

Hi. Just curious about the discrepancy between the colour temp on the Ion versus the displayed temp on the fixture when controlled by DMX. I put 5500k into the board but when looking at the head there is a much lower temperature displayed on the screen of the fixture.

Parents

0 Therese over 5 years ago

Hi there,

We should check what DMX value the console is outputting on that parameter when 5500K is selected. If you capture the channel and hit the About button to see current values on the channel - what values are being shown in the Color Temp parameter? Additionally, what software version and fixture library version are you currently running?

Best,

Therese
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Canuck over 5 years ago in reply to Therese

Colour Temp parameter says: 5500 in the Value and Abs columns. Under DMX it says 103

Version: 2.7.0

Fix Library: 2.7.0.68
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Canuck over 5 years ago in reply to Therese

Colour Temp parameter says: 5500 in the Value and Abs columns. Under DMX it says 103

Version: 2.7.0

Fix Library: 2.7.0.68
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 Therese over 5 years ago in reply to Canuck

Hello,

I would recommend updating to v2.8.2 and the latest fixture library (build 4) if you are able. However, I will also need to know the mode that you have patched your fixture as. Looking at the DMX specifications off of the manufacturer's website - there are different formulas for the CCT parameter based on the mode chosen. We should also check what f/w version your fixtures are currently in as well!

Best,

Therese

TRUEMATCH_DMX_MAP.pdf
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel