Need Help ASAP with Clearing Parameters

Try putting clear at the very end of your macro

thanks for the fast reply. It did not fix the issue. 

Try this:

Your macros are setting manual values.  Then you hit go, they are still captured.  When you hit back, it is like running an out of sequence cue, as if you have said "Go to Cue Last Enter' and the forces the manual values out.

Adding a clear at the end of the Macro should clear the channel selection from the command line and allow the cue to progress and take over the levels. 

You mention this is not working- do you still have text on the command line when you hit go?

my macro currently looks like this: Group 13 Focus_Palette 51 ◆ Group 13 Beam_Palette 51 ◆

I added Clear_CmdLine ◆ when that didn't work I deleted that and added Clear_Cmd ◆

Thoughts? 

and I DO NOT have any text on command line

That is certainly odd.

Any chance you can share the show file?
What software version are you running? 

What mode is the macro in?

Also, apologies ahead of time but I'm not going to be able to respond as quickly very soon, but I think this data may help others to help you as well.

Mode is Background mode. 

I wonder if that's part of it.  Background mode runs as user 0- so the command was set by a different user than the one hitting go...

tried both foreground and default. Neither result in it clearing for the next cue. I also added Clear_CmdLine at end of macro. No luck. I imagine it's something stupid that I'm doing. 

can't upload file. email?

2.8.2 build 8

Your values are not being overridden because there isn’t a move instruction in the next cue. If you assert the cue, it will fade the values back to where they are in the cue. You can also assert the entire cue list, if you would like this to be the behavior for every cue.

This definitely sounds like a bug, because you are doing things correctly. try creating a new macro, default mode, same syntax. but don't put an enter after the clear command line