Where can we get new fixture profile for ETC ION 1000 for the U King 60w mini

Looks like we got the moving working but not yet able to turn on the light and adjust dimming yet?????
aaargh.
: )

Any help?

And Thanks!!

: )

can you make a screenshot of what you have so far?

Also, it does not show the 11th channel line but that says: White

Also, we tried setting brightness range to 0-255 as well but no go.
But we are able to move it around fine now.
: )

change Brightness to a parameter called Intens.

red, green, blue and white each should have a home value of 255

Will do.
We tried Intens but it keeps putting it to the bottom???
We will change the r/g/b/w to 255 home.

stay tuned.

: )

it doesn't matter where in the list a parameter is listed. just get rid of brightness. if intens is at the bottom that's fine as well. go to Intens and in the DMX column enter 6.

and the first 4 parameters should be different as well:

delete Pan 2 and delete Tilt 2.

1 / Pan / 16b: 1,2 / 32768 / / -270 > 270

2 / Tilt / 16b: 3,4 / 32768 / / -120 > 120

it should look something like this:

remember, it's not important in which line something is listed, just that the horizontal information stays together

Done.

Still no light.

Pan and title still working fine.

Just no light.
: (
Also, we are working in 11chan mode.

Also, we noticed you have the pan running -270 > 270 but the manual says 0 -255 for everything?

Just trying to understand the numbers.
: )

Appreciate your help!!

: )

when you change the personality, don't forget to press the green button "Save Fixture".

then go to Live, press GoToCue Out Enter, and check again

the thing with Pan and -270:

Eos helps you program the lights by allowing you to use Pan and Tilt in degrees rather than 0-255. i assume that the moving light has a pan range of 540° (like most moving lights nowadays have). 540° in total is the same as going from center 270° and 270° to the other side. that's what -270 > 270 says.

the advantage of this is that you can say something like "i want my light to turn 90°to the right": Chan 1 Pan +90 Enter

the thing with Pan and -270:

Eos helps you program the lights by allowing you to use Pan and Tilt in degrees rather than 0-255. i assume that the moving light has a pan range of 540° (like most moving lights nowadays have). 540° in total is the same as going from center 270° and 270° to the other side. that's what -270 > 270 says.

the advantage of this is that you can say something like "i want my light to turn 90°to the right": Chan 1 Pan +90 Enter