Hi have a nano hog 4 wing. But the pc is running windows 8.1 on the wing and not to this is hog 4pc v2.2.0 installed what am I doing wrong because that would recognize the wing
Please unplug the USB cable and power and then do the following: Hold down the following three buttons Next Page and the Choose Key for master 1 and master 2. Plug in the USB cable and power with the three buttons held down. Keep the buttons held down for about 5 seconds and then release the buttons. This is force the nano to re-download it's software from your computer.
If this does not work please re-install Hog 4PC and connect the Nano again. Sounds like the driver never got installed or did not install correctly.
Please unplug the USB cable and power and then do the following: Hold down the following three buttons Next Page and the Choose Key for master 1 and master 2. Plug in the USB cable and power with the three buttons held down. Keep the buttons held down for about 5 seconds and then release the buttons. This is force the nano to re-download it's software from your computer.
If this does not work please re-install Hog 4PC and connect the Nano again. Sounds like the driver never got installed or did not install correctly.
