2 x HOG PC failover config

Hi,
Is it possible to run HogPC with a second PC in a console failover config? Can it work with a switch and only one DMX widget?

Been searching old threads but can´t find info on this.

Thank´s!
Parents
  • You can have a tracking server backup config.
    Depending on your net-number you will have a full tracking backup or just a tracking server.
    If both PCs share the same net-number they will track all playbacks, page-change etc.
    If you have different net-numbers then you have tracking show server.
    The wings wont automatically switch from one PC to the other. They need to be attached to the hardware.
    You might be lucky with KVM Switch, but this wont all be happen automatic and still would need some config in the software after switching
Reply
  • You can have a tracking server backup config.
    Depending on your net-number you will have a full tracking backup or just a tracking server.
    If both PCs share the same net-number they will track all playbacks, page-change etc.
    If you have different net-numbers then you have tracking show server.
    The wings wont automatically switch from one PC to the other. They need to be attached to the hardware.
    You might be lucky with KVM Switch, but this wont all be happen automatic and still would need some config in the software after switching
Children
No Data