Hi all,
I'm trying to practice a setup at home before I get on-site.
My goal: videos in Resolume Area should control fixtures on our Road Hog 4 via Artnet.
Current progress: I am successfully sending artnet data from Arena through my LAN and I'm receiving it on a laptop running Hog 4 PC (confirmed with DMX workshop).
The problem: No DMX values appear in the "DMX Output" window of the Hog.
I've followed the YouTube tutorial and the written documentation and checked my over and over, and I feel like I'm losing my mind.
Environment
| Sending PC | Receiving PC |
|---|
| Windows 10 Pro, Resolume Arena 6.1.3 rev63441 | Windows 10 Pro, Hog 4 PC v3.12.0 (b2351) |
| Subnet 0, Universe 0. DMX Channels: 1 thru 18 | Same |
| 192.168.0.1 | 192.168.0.2 |
Network: A flat layer 2 LAN, no firewall. Sending PC is wired to managed switch, receiving PC is connected to Wireless AP.
Screenshots
- Hog UI
- Hog Art-Net Input Settings
- Hog Art-Net Output Settings
- Hog FixtureNet Settings
- DMX Workshop
- Resolume Output Settings
- Resolume DMX Settings
Troubleshooting steps
- Windows firewall is disabled on both computers
- Packet captures from both ends are good: traffic is flowing, DMX data inside is as expected
Thanks all.
