• State Not Answered
  • Date
    hg siegenthaler
  • Date
  • Replies 6 replies
  • Subscribers 21 subscribers
  • Views 487 views
  • Users 0 members are here
Options
Related

Palette Recording Problem

Hi there
There're still some big Problems with the merge function into existing palettes. Sometimes I can't merge any changes into the existing Palettes.
This is a mess for a Show with lot of different fixtures and palettes! Replace wan't work for my sactual how....
This bug should have high priority.
System is a Hog4 (b321) with a Fullboar in the same Network, the poblem happens also when I use just one of These desks.
Cheers
Hg
Parents
  • 0
    Chris,

    My most recent example of this was yesterday. Wasn't a merge into a palette, but it was an update into a 3rd subsequent tracking cue behind a blocking cue.

    1. Blocking cue1 in a tracking list contained "I" and "C" values for an LED wall made of Color Blasts and ICoves.

    2. Tracking Cue2 in the same list contained only new "C" values.

    3. Tracking Cue3 in the same list contained only new "C" Values different from Cue 1 and 2.

    4. Desk was running Cue3, output was a sum of tracked values from 1-3.

    5. Made a slight change in Saturation for Cue 3 and updated.

    6. After update noticed that not all the fixture parameters indicated in the programer changed to white from blue (indicating the save, merge or update).

    7. Confirmed not all Fixtures were updated into Cue3 by tapping blind and viewing the LED wall.

    8. Re-selected all the LED's in the programmer touched active param's for shits and giggles and re applied the update to Cue3. All was well.

    The above only happens very seldom.

    Will check logs for you guys if and when it happens again.

    Edit... Fyi, I'm still using b304 not b321, so not sure if it even applies anymore.

    JB
Reply
  • 0
    Chris,

    My most recent example of this was yesterday. Wasn't a merge into a palette, but it was an update into a 3rd subsequent tracking cue behind a blocking cue.

    1. Blocking cue1 in a tracking list contained "I" and "C" values for an LED wall made of Color Blasts and ICoves.

    2. Tracking Cue2 in the same list contained only new "C" values.

    3. Tracking Cue3 in the same list contained only new "C" Values different from Cue 1 and 2.

    4. Desk was running Cue3, output was a sum of tracked values from 1-3.

    5. Made a slight change in Saturation for Cue 3 and updated.

    6. After update noticed that not all the fixture parameters indicated in the programer changed to white from blue (indicating the save, merge or update).

    7. Confirmed not all Fixtures were updated into Cue3 by tapping blind and viewing the LED wall.

    8. Re-selected all the LED's in the programmer touched active param's for shits and giggles and re applied the update to Cue3. All was well.

    The above only happens very seldom.

    Will check logs for you guys if and when it happens again.

    Edit... Fyi, I'm still using b304 not b321, so not sure if it even applies anymore.

    JB
Children
No Data

www.etcconnect.com