• State Not Answered
  • Date
    stevejarden
  • Date
  • Replies 8 replies
  • Subscribers 21 subscribers
  • Views 486 views
  • Users 0 members are here
Options
Related

Dmx output slowing down

I was running 1.1.1 in nano mode on a HP touch PC with windows 7 when Incurred this problem

Output would begin to slow down over 20 minutes. logging off and on would fix the issue only to slow down again over the next 20mins

we had a superwidget hog 3 playback and program wings attached
was a small rig of just 2 technobeams 4 mac 101s and 26 generic RGB LEDs any ideas on what is causing this?

I had used the same computer on a show a month ago and didnt have this issue

Cheers

Steve
Parents
  • 0
    Hi Steve, is the processor in the PC at least a Dual Core 1.7Ghz or faster? This is the minimum system requirements.

    Are you using the two USB ports on the rear of one of the wings to connect the 2nd wing and widget to, or are the three devices each going to individual USB ports on the PC? You can try using one wing connected to the PC and the other two items connected to the rear of the first wing.

    Was the PC connected to the internet or another network for example? Were there any other programs running at the time?
Reply
  • 0
    Hi Steve, is the processor in the PC at least a Dual Core 1.7Ghz or faster? This is the minimum system requirements.

    Are you using the two USB ports on the rear of one of the wings to connect the 2nd wing and widget to, or are the three devices each going to individual USB ports on the PC? You can try using one wing connected to the PC and the other two items connected to the rear of the first wing.

    Was the PC connected to the internet or another network for example? Were there any other programs running at the time?
Children
No Data

www.etcconnect.com