Hey Guys when i'm in a show and change the Lock-code then the default 1234-code is still active but the Lock-menu in NETWORK-SETTINGS shows the "new" code.
Are you in the Control Panel of the Hog or the DP8K?
From the Console:
You can use the Lock function to lock the DMX Processor's controls. The default PIN is 1234; a new PIN can be assigned from a Hog console via Setup → Network on the Setup Toolbar. Select the required DMX Processor in the network window and click Settings. Change PIN and OK to apply and close the window.
From the menu on the 8K To lock the DMX Processor locally:
In the Control Panel, select Lock : the Enter PIN to Unlock screen will appear.
Are you in the Control Panel of the Hog or the DP8K?
From the Console:
You can use the Lock function to lock the DMX Processor's controls. The default PIN is 1234; a new PIN can be assigned from a Hog console via Setup → Network on the Setup Toolbar. Select the required DMX Processor in the network window and click Settings. Change PIN and OK to apply and close the window.
From the menu on the 8K To lock the DMX Processor locally:
In the Control Panel, select Lock : the Enter PIN to Unlock screen will appear.
