[BUG] [v1.2.0] Command Keys + Views

1) Record a view, set Additive to YES.

2) Use [b]View[/b] + ## + [b]Move[/b] + Function Key to move recorded view to a Function Key.

3) Select fixtures using a recorded group. Do not press Enter.

4) Press Function Key from step 2.

5) Fixtures are released.

Using the corresponding View soft button in Step 4 does not release the fixtures.
Parents
  • Louis...

    If you don't want the command key triggered view change to clear your programmer... All you need to do is make sure that before you switch views with the command keys, just touch a parameter on the fixtures that you want to keep in the programmer after the view change. It's kinda the same idea of using highlight to bounce through fixtures and then touch the ones you want to keep in the programmer.
Reply
  • Louis...

    If you don't want the command key triggered view change to clear your programmer... All you need to do is make sure that before you switch views with the command keys, just touch a parameter on the fixtures that you want to keep in the programmer after the view change. It's kinda the same idea of using highlight to bounce through fixtures and then touch the ones you want to keep in the programmer.
Children
No Data