Options
Related

OSC Control

I have OSC working fine (love it btw) I just run into a few minor problems when making the layout for TouchOSC.

Is there a way to "view" the status of rather or not you are in CMD or KIND?
[INDENT]Is there a way to toggle said status?[/INDENT]

Is there a way to pull the info from the function/command keys on the front panel?

If you know how to do this in a different application other than TouchOSC Editor then be my gust and let me know.
Parents
  • 0
    [QUOTE=tristandoo;71279]Well i would prefer it to be done with one button....
    would the path for 2 buttons be:
    hog/hardware/pig
    hog/hardware/enter
    ?

    Key down is one OSC command
    Key up is a second OSC command

    Some 3rd party apps(TouchOSC) are good about sending the
    "up" for you when you remove your finger from the button.

    i.e. /hog/hardware/pig/1 means push PIG down
    /hog/hwardware/pig/0 means release PIG

    If you're not using touchOSC and something else, be careful or you
    will wind up with stuck keys. Fun :cool:
Reply
  • 0
    [QUOTE=tristandoo;71279]Well i would prefer it to be done with one button....
    would the path for 2 buttons be:
    hog/hardware/pig
    hog/hardware/enter
    ?

    Key down is one OSC command
    Key up is a second OSC command

    Some 3rd party apps(TouchOSC) are good about sending the
    "up" for you when you remove your finger from the button.

    i.e. /hog/hardware/pig/1 means push PIG down
    /hog/hwardware/pig/0 means release PIG

    If you're not using touchOSC and something else, be careful or you
    will wind up with stuck keys. Fun :cool:
Children
No Data

www.etcconnect.com