Ver 2.0 509b
FB4
Cuelist fade and delay times will indicate default cuelist time values when cues are recorded from a reference palette that contains independent parameter time values.
Repro....
Make sure default programming timing in preferences is set to 2 sec globally.
Make sure position directory has mask set up to allow Position, Intensity and Time.
1. Select mover 1
2. Set tilt +90 and intensity full
3. Press "Time 1 Enter"
4. Press "Intensity Time Time .25 Enter"
5. Record as a Reference palette in position directory, making sure to include Position, Intensity and time. Name palette "Reference"
6. Without clearing the programmer, Record as a Direct palette in position directory, making sure to include Position, Intensity and time. Name palette "Direct"
7. Using the two palettes created, record each one into its own cue. You will notice that the cue that was recorded from the direct palette will show the proper times in the cuelist window, but the cue that was recorded with the reference palette will show a fade time of 2 sec and a delay of 0 sec which is the default time values.
I understand that the cuelist is not indicating proper timing values since it is referencing a palette, but now that we have the ability to create and program using timing palettes, it might be a bit confusing if the cuelists are indicating wrong times.
Thanks
JB
