Options
Related

HOG4PC Nano Mode and Multiple Monitors

Running HOG4PC (one release back from the current version) and when running in Nano mode we could not get multiple monitors to work well. We had to revert to regular mode (5 encoders) which was a bit of a drag because we are using the HOG3 programming wing and HOG3 playback wings.

Is there a trick to getting Nano mode to work well with multiple monitors. It seems like when you switch to Nano mode the main screen has some fixed layouts that could not be modified. It may be that we just couldn't figure out how to do what we wanted with the screen layouts. We could not get the playback and cue lists on the monitor we wanted.

Thanks,
Ross

Ephrata Performing Arts Center
Parents
  • 0
    Ross, you might also work around this when you create user-kinds. So you can make your own wheelsets where you need to control of the 5th wheel.

    Nano layout is basically the layout from the Roadhog and designed to work with the Nano and a single monitor like laptops or typical all-in-one PC
    Thats also why the external monitor layout is like on Roadhog.

    At the moment coding-time is more used for new programming-features so I guess we wont see any changes for HOG PC layouts
Reply
  • 0
    Ross, you might also work around this when you create user-kinds. So you can make your own wheelsets where you need to control of the 5th wheel.

    Nano layout is basically the layout from the Roadhog and designed to work with the Nano and a single monitor like laptops or typical all-in-one PC
    Thats also why the external monitor layout is like on Roadhog.

    At the moment coding-time is more used for new programming-features so I guess we wont see any changes for HOG PC layouts
Children
No Data

www.etcconnect.com