Hi, recently used Touch OSC on a RH4 and faders drop to zero when using on my iPad. If not go to 100% the values will stay. I've reloaded all OSC software but still the same problem. Anybody ?
When you launch the OSC app the faders are at 0 so when you move the OSC fader the intensity will jump from the value of the consoles fader to the value being sent from the OSC fader and since you are coming off of 0 this will give the impressing at the faders are jumping to 0. Since the RH's faders are not motorized they go into an unlocked state, you see this by the red line (RH fader value) and blue bar (OSC fader value), in order to re-lock the RH fader you must move the fader to the current OSC fader location.
Can you confirm this is what you are running into.
When you launch the OSC app the faders are at 0 so when you move the OSC fader the intensity will jump from the value of the consoles fader to the value being sent from the OSC fader and since you are coming off of 0 this will give the impressing at the faders are jumping to 0. Since the RH's faders are not motorized they go into an unlocked state, you see this by the red line (RH fader value) and blue bar (OSC fader value), in order to re-lock the RH fader you must move the fader to the current OSC fader location.
Can you confirm this is what you are running into.
