Options
Related

internal dmx widget: not detected?!

Just upgraded my RH4 to 2.5 from 2.4. I believe I had output at first but after some power cycles i lost all internal dmx out. I connected a superwidget and thankfully can run the show temporarily...
Does anyone have any input that could help??. I know with the holiday that HES most likely won't be open for support til Monday at least.
Since i initially had dmx out, I'm gonna assume I made a fatal mistake somewhere and "disabled" the internal widget. I just don't know how and more importantly, how to reenable it. Thanks. And to be certain on this, artnet will or will not run direct from the super widget via a 5pin to cat5? Or do I need something else in line like a pathport? Only thing Ive really lost for the show is video(running it manually).
Parents
  • 0
    Hi,
    I believe when you start a new show and open the settings at the bottom the page you can enable/disable the internal DP.
    If this is the case I would then re-start the console afterwards and see if the internal widget returns,
    I may be talking about Hog 3 S/W only as I haven't got Hog 4 S/W to hand..

    Failing that a full ISO usually works ,back up all shows prior to a full install.

    Best C
Reply
  • 0
    Hi,
    I believe when you start a new show and open the settings at the bottom the page you can enable/disable the internal DP.
    If this is the case I would then re-start the console afterwards and see if the internal widget returns,
    I may be talking about Hog 3 S/W only as I haven't got Hog 4 S/W to hand..

    Failing that a full ISO usually works ,back up all shows prior to a full install.

    Best C
Children
No Data

www.etcconnect.com