• State Not Answered
  • Date
    morn - Former HES Forum Member
  • Date
  • Replies 6 replies
  • Subscribers 21 subscribers
  • Views 640 views
  • Users 0 members are here
Options
Related

Changing fadetimes of multiple cuelists

Hello everybody.
I am putting together my first busking layout on a Road Hog 4. The ideas in several threads of this forum were very helpful to achieve this. Nevertheless I'm still struggling with changing fadetimes between different (single cue) cuelists. Since there is no option to globally override programmed fadetimes by a Time and Manual Crossfade Fader like on the desks I worked with before, I tried to simulate at least the time option with macros, which shall change fadetimes for a whole line of virtual cuelists, but I'm still have problems with the correct syntax, since list xxx > xxx Time X or similar ended up with no result.
So has anyone an idea how i have to set up my fadetime macros correctly?
Thank you in advance for your help.
Parents
  • 0
    @Morn
    I think u dont see it as i attended.
    Let me first correct myself. I set my Cues on 0.1 sec instead of 0.01s.
    Batch master: Playback rate fader / upper bound x2 / lower bound x0

    U have to see it backwards. When i set my cue on 0.1 and set Batch fader at 100% my cue will goin 0.1 sec. If i set the batch fader level on 10% the cue will go with 1s. Because 10% rate of 0.1s, is 1s.
    5% = 2s
    2%= 5s
    etc
    If i set the batch fader at 200% the cues in the batch master will go in 0.05 sec.

    @jxgriffi,
    How do u setup your fader to scale the time longer the higher the fader level is? the only way i know to scale time is with PLayback rate. But this works with percantages. Wich means the higher the fader level how faster the cue fires instead of how you explain it.
Reply
  • 0
    @Morn
    I think u dont see it as i attended.
    Let me first correct myself. I set my Cues on 0.1 sec instead of 0.01s.
    Batch master: Playback rate fader / upper bound x2 / lower bound x0

    U have to see it backwards. When i set my cue on 0.1 and set Batch fader at 100% my cue will goin 0.1 sec. If i set the batch fader level on 10% the cue will go with 1s. Because 10% rate of 0.1s, is 1s.
    5% = 2s
    2%= 5s
    etc
    If i set the batch fader at 200% the cues in the batch master will go in 0.05 sec.

    @jxgriffi,
    How do u setup your fader to scale the time longer the higher the fader level is? the only way i know to scale time is with PLayback rate. But this works with percantages. Wich means the higher the fader level how faster the cue fires instead of how you explain it.
Children
No Data

www.etcconnect.com