• State Not Answered
  • Date
    morn - Former HES Forum Member
  • Date
  • Replies 6 replies
  • Subscribers 21 subscribers
  • Views 643 views
  • Users 0 members are here
Options
Related

Changing fadetimes of multiple cuelists

Hello everybody.
I am putting together my first busking layout on a Road Hog 4. The ideas in several threads of this forum were very helpful to achieve this. Nevertheless I'm still struggling with changing fadetimes between different (single cue) cuelists. Since there is no option to globally override programmed fadetimes by a Time and Manual Crossfade Fader like on the desks I worked with before, I tried to simulate at least the time option with macros, which shall change fadetimes for a whole line of virtual cuelists, but I'm still have problems with the correct syntax, since list xxx > xxx Time X or similar ended up with no result.
So has anyone an idea how i have to set up my fadetime macros correctly?
Thank you in advance for your help.
Parents
  • 0
    Yes it is with playback rate and yes it's percentages.

    Here's my example..
    I have lists 1231>1250 assigned to batch 1 (color time)
    Lists 1231>1250 are set to a 1 second fade time
    Batch 1 is on Fader 11 and the fader is set to "Playback Scale Rate" - upper bound "4x" and lower bound "0x". Flash button is set to "SET" and "1x"

    Now, with the fader at 1x, the fades happen in 1 sec. Push the fader up and you get 0 counts. Between 1x and 4x on the fader (middle to upper) is rates between 1 sec and 0 sec.
    Pull the fader down below the mid point and it slows down the fade. With the fader at 0, it doesn't fade at all (holds the look until I slow bring up the fader). With the fader at .11x (just off 0), it takes approx. 4.5 seconds for the fade.

    Does that help?
Reply
  • 0
    Yes it is with playback rate and yes it's percentages.

    Here's my example..
    I have lists 1231>1250 assigned to batch 1 (color time)
    Lists 1231>1250 are set to a 1 second fade time
    Batch 1 is on Fader 11 and the fader is set to "Playback Scale Rate" - upper bound "4x" and lower bound "0x". Flash button is set to "SET" and "1x"

    Now, with the fader at 1x, the fades happen in 1 sec. Push the fader up and you get 0 counts. Between 1x and 4x on the fader (middle to upper) is rates between 1 sec and 0 sec.
    Pull the fader down below the mid point and it slows down the fade. With the fader at 0, it doesn't fade at all (holds the look until I slow bring up the fader). With the fader at .11x (just off 0), it takes approx. 4.5 seconds for the fade.

    Does that help?
Children
No Data

www.etcconnect.com