I have a cue list where between cue A and cue B I change five VL770s from one gobo to another. When the cue changes three fixtures will change to the new gobo and then later in the 4s fade, the other two fixtures change to the new gobo. They are all on the same gobo and all changing to the same gobo but they don't all do it simultaneously. Is there something I am doing wrong in my programming that is causing this or is there something different I can do that will correct this problem? Any help you have would be appreciated.
Did you store any delay or path in the cue for the 2 fixtures that behave different. Whats happening when you reprogramm on another cuelist. Dont know the 770s, do they have timing channels for beam parameters? when you open the cue, have a look at the delay tab or search for any timing channels
Did you store any delay or path in the cue for the 2 fixtures that behave different. Whats happening when you reprogramm on another cuelist. Dont know the 770s, do they have timing channels for beam parameters? when you open the cue, have a look at the delay tab or search for any timing channels
