iso file on website corrupt?

Before installing new software, ensure that all show files, libraries, and archives are backed up. A Full Install will ERASE all data on the console's hard drive.
Before creating a bootable flash drive, ensure that all files are backed up, making a flash drive bootabale will ERASE all data on the drive.

The latest software version is 3.9.0 and can be found here under "Hog4" and "Software downloads". See: Release Notes.


See: 29.2 Console Software Full Install for detailed instructions on how to update the console.
See: 29.3 Create a Full Install Flash Drive for detailed instructions on how to make a bootable flash drive.

Software versions 3.9.0 and above will require the ETCHER application.
Software versions 3.8.0 and below use the LINUX LIVE application.

Show files created on an older software version can be loaded on a newer software version. Keep in mind that show files and archives that are "touched" by a newer show software version will not be compatible with desks running older software. Keep all desks on the same software version for feasibility. This includes Hog4PC setups.

If you decide that you want to downgrade your desk, the process is the same, you just have to re-flash the USB drive with the software version of your choice. For older software versions: Hog 4 OS software Archive

If you have any external DMX Processors, they will also need to be updated to the consoles software version. See: 29.5 DMX Processor Software Update. If there are any issues you might need to do a full install instead. See: 29.6 DMX Processor Software Full Install. Keep in mind any settings you had previously set to the DMX Processor will be reset.

Before installing new software, ensure that all show files, libraries, and archives are backed up. A Full Install will ERASE all data on the console's hard drive.
Before creating a bootable flash drive, ensure that all files are backed up, making a flash drive bootabale will ERASE all data on the drive.

The latest software version is 3.9.0 and can be found here under "Hog4" and "Software downloads". See: Release Notes.


See: 29.2 Console Software Full Install for detailed instructions on how to update the console.
See: 29.3 Create a Full Install Flash Drive for detailed instructions on how to make a bootable flash drive.

Software versions 3.9.0 and above will require the ETCHER application.
Software versions 3.8.0 and below use the LINUX LIVE application.

Show files created on an older software version can be loaded on a newer software version. Keep in mind that show files and archives that are "touched" by a newer show software version will not be compatible with desks running older software. Keep all desks on the same software version for feasibility. This includes Hog4PC setups.

If you decide that you want to downgrade your desk, the process is the same, you just have to re-flash the USB drive with the software version of your choice. For older software versions: Hog 4 OS software Archive

If you have any external DMX Processors, they will also need to be updated to the consoles software version. See: 29.5 DMX Processor Software Update. If there are any issues you might need to do a full install instead. See: 29.6 DMX Processor Software Full Install. Keep in mind any settings you had previously set to the DMX Processor will be reset.