• State Not Answered
  • Date
    marc lorenz
  • Date
  • Replies 28 replies
  • Subscribers 22 subscribers
  • Views 2738 views
  • Users 0 members are here
Options
Related

sACN issues with certain fixture types

We discovered some strange things happening when using sACN with cetrain Fixture types.
From DMX 360 and higher no Data is expcepted by the fixture.
sACN Viewer and even DMX testers show data for these channels.

Swapping to artnet and all was fine. Also swapping to another brand of console and all was fine an sACN.
Has happend to 3 different people... There is a posting on facebook and Marco Silva had it in Portugal.
In my case and the one from Marco GLP fixtures had been used, the one on Facebook was Martin Viper
Parents
  • 0
    6 Month later...
    I do not know if this bug is fixed in the upcomming 1.14. I can not test it with one of our Hog´s.

    For me the best work around is to patch one channel at the end of the DMX line. Or after the last Fixture.

    The problem here is that the Hog does not output unasainged fixture Channels via sACN. For example the last 5 channels of an Viper Perform are reserved. So the Fixture only gets 29 DMX Channels and stops working.
    You can also edit the Fixture in the fixture Builder and asaign the last Channels as: any 0.



Reply
  • 0
    6 Month later...
    I do not know if this bug is fixed in the upcomming 1.14. I can not test it with one of our Hog´s.

    For me the best work around is to patch one channel at the end of the DMX line. Or after the last Fixture.

    The problem here is that the Hog does not output unasainged fixture Channels via sACN. For example the last 5 channels of an Viper Perform are reserved. So the Fixture only gets 29 DMX Channels and stops working.
    You can also edit the Fixture in the fixture Builder and asaign the last Channels as: any 0.



Children
No Data

www.etcconnect.com