• State Not Answered
  • Date
    mikethefirst
  • Date
  • Replies 34 replies
  • Subscribers 22 subscribers
  • Views 4083 views
  • Users 0 members are here
Options
Related

Bug-Lag when usign encoders on Hoglet

Hello everybody, i recently upgraded my Hogon PC to 3.14 and I´m facing a strange behaviour after a while. When scrolling through  (a list or the output for example) by using Open+EncoderWheel (for up/down), the list doesn´t move along with turning the encoder. The scrolling just stops, and after a second or so it moves again. Same is happening, when I want to adjust Pan/Tilt for example.

At first, I thought, it would be in context with the network. I used a laptop with an own superwidget for Backup. Hog-/Fixturenet have their own NICs with different IP ranges, so both nets are separatet. PC with Hoglet had its four universes to ArtNet as well (there was no output on ArtNet). When having turned of the PC with Hoglet, everything went fine for a while, then the upper behaviour came up again. Didn´t have any problems with further versions

Specs of PC with Hoglet: Core i3 8100, 8 Gb RAM, 120 Gb SSD, 27" Multitouch (USB). Hoglet is the first series, it was bought in December 2016. I THINK its version is 2.3, but I am not sure.

Could it be that the patched ArtNet universes cause trouble, when they are not in use? I have to admit that in further versions I had not enabled any DMX-output over network, when having not used it

Parents
  • 0
    I am having the "same" issue. That is, when I used the physical encoder wheels on the Hoglet 4, the display on my monitor lags (as do the physical fixture) 1-3 seconds. It can reproduce it with a simple intensity change on a fixture. It started for me with widows update March 9, KB000802, OS Build 19041.867 and 19042.867. I am on Windows 20H2 OS Build 19042.867 When I back out that update, the issue goes away.

    The computer system is dedicated to only this application, nvidia graphics card, significant memory, etc.. All USB are directly into the computer.

    I am running HOG 3.15.0 (b.3121)

    I backed out that windows update and the issue went away so it certainly appears to be related to that update.
Reply
  • 0
    I am having the "same" issue. That is, when I used the physical encoder wheels on the Hoglet 4, the display on my monitor lags (as do the physical fixture) 1-3 seconds. It can reproduce it with a simple intensity change on a fixture. It started for me with widows update March 9, KB000802, OS Build 19041.867 and 19042.867. I am on Windows 20H2 OS Build 19042.867 When I back out that update, the issue goes away.

    The computer system is dedicated to only this application, nvidia graphics card, significant memory, etc.. All USB are directly into the computer.

    I am running HOG 3.15.0 (b.3121)

    I backed out that windows update and the issue went away so it certainly appears to be related to that update.
Children
No Data

www.etcconnect.com