Faders going haywire

Best friend died a few months ago I’ve been running his gig with limited knowledge of the board.  The faders show to be buggin out when nobody is touching the board.  Any help would be appreciated 
file:///var/mobile/Library/SMS/Attachments/d9/09/18DA0363-E6CF-4A4D-97A6-B6699CFDC7B6/IMG_3203.MOV
Parents
  • Hello,

    Would you mind emaing this into support? HESservice@etcconnect.com

    Most likely the fader would need to be replaced, here is an article that breaks down which devices are screw in vs solder, as well as lists part numbers:

    support.etcconnect.com/HES/Consoles/Hog_4/Hardware/Which_Hog_4_Consoles%2F%2FWings__Have_Motorized_Faders%3F
Reply
  • Hello,

    Would you mind emaing this into support? HESservice@etcconnect.com

    Most likely the fader would need to be replaced, here is an article that breaks down which devices are screw in vs solder, as well as lists part numbers:

    support.etcconnect.com/HES/Consoles/Hog_4/Hardware/Which_Hog_4_Consoles%2F%2FWings__Have_Motorized_Faders%3F
Children
No Data