Cues double firing ignoring links

Sorry to hear about your cues double triggering.

Does this only happen when using the main Go button, or only when the Go button on the specific master is used, or in both cases?

To see if there might be a hardware issue, from the Hog Start window, open Control Panel, and go to the Diagnostics tab; click on Test Control Surface. From there, click on the responsible button. When the physical key is being pressed, the onscreen version of the button will turn red, and when you release the key it will turn green on your screen; watch for anything here that is different than what I said here.  If the button turns red when you're not holding it, something is happening with the button.

To see if it is a software issue, since you said it isn't easily replicated or predictable, would you send your show file to HESservice@highend.com so we can test it out, and see if we get the same issue?

Thanks.

Having the same issue here with a RoadHog4. Every once in a while, when i press the GO button (the main button) the next 2 cues are fired. As commented above, it is not predictable, it happens sporadically at random points in the show. Tried the test control and everything seems to be fine with that..

Yes, I also see this on an RH4, but it's so intermittent (maybe 1 instance per 2000 cues, (but then also maybe twice in 300 cues)) that I can't really check it with the surface test