Just curious if you could implement a pull down in the fixture builder to select a fog fan and fog output option. Tried to pull from the Martin hazer profile but found it mapped to an intensity fader under intensity and a beam fader called Dmx
Fog is no typical feature of a light. So thats why it is not available and mapped to intensity and the DMX channel. This also gives you the option to use the fog-level with the fader (set to HTP)
Fog is no typical feature of a light. So thats why it is not available and mapped to intensity and the DMX channel. This also gives you the option to use the fog-level with the fader (set to HTP)