Hog 4 Remote Focus

David

Try setting the sensitivity of the Trackball Positon Mode all the way to slow.
You can also set the sensitivity of the Parameter Wheels in the same window.

Setup
Preferences
Sensitivity

Sorry but you can not assign P/T to the arrow keys.

would be good if you could put the encoders into arrow mode for precisely this reason or even a hog4pc tablet edition

You can also try if it helps if you put the encoder-buttons to adjust by one.
So one click would give you 1°

Get a mouse with a encoder wheel set the settings to slow and it will work.

[QUOTE=vadillo;73797]Get a mouse with a encoder wheel set the settings to slow and it will work.
Can you elaborate a bit more on how this would work?

if you use a mouse with a encoder wheel and click on a virtual encoder just once then you would be able to use the encoder wheel on the actual mouse and it would work nicely as long as you had set the sensitivity of the Trackball Position Mode all the way to slow but just click once on the virtual encoders if you click twice on the same encoder the mouse gets stuck sometimes. hope this helps its much easier two control your Pan Tilt this way