Options
Related

Logical Fixture Sellection other than "Live"

I was experimenting with syntax to see if H4 has the ability to use syntax similar to "Live" filtering, to logically select fixtures embedded in programming that are associated with palettes...

It is possible to use the syntax ... Live color1 + position2 ... to bring all fixtures into the programmer that have a live output of color1 and position2... But, is there similar syntax that can select fixtures out of cues and scenes in a similar manner, even though the fixtures are not active at the time?

JB
Parents
  • 0
    15.2.3 Using Copy to Bring Values into an Editor

    You can bring parameter values from a palette, scene or cue into an editor such as the Programmer
    using Copy:
    • Cue 1 Copy, Enter : copies the contents of Cue 1 of the currently chosen
    cuelist into the current editor.
    You can chose which fixtures or parameter types are copied into the Programmer. For example:
    • Cue 1 Position Copy, Enter : copies only the position values from Cue 1 into
    the current editor.

    Hope this helps.
Reply
  • 0
    15.2.3 Using Copy to Bring Values into an Editor

    You can bring parameter values from a palette, scene or cue into an editor such as the Programmer
    using Copy:
    • Cue 1 Copy, Enter : copies the contents of Cue 1 of the currently chosen
    cuelist into the current editor.
    You can chose which fixtures or parameter types are copied into the Programmer. For example:
    • Cue 1 Position Copy, Enter : copies only the position values from Cue 1 into
    the current editor.

    Hope this helps.
Children
No Data

www.etcconnect.com