Options
Related

Logical Fixture Sellection other than "Live"

I was experimenting with syntax to see if H4 has the ability to use syntax similar to "Live" filtering, to logically select fixtures embedded in programming that are associated with palettes...

It is possible to use the syntax ... Live color1 + position2 ... to bring all fixtures into the programmer that have a live output of color1 and position2... But, is there similar syntax that can select fixtures out of cues and scenes in a similar manner, even though the fixtures are not active at the time?

JB
Parents
  • 0
    Hey Scott,

    Thanks. But I'm referring to palette and or Value filtering.

    Like with "Live" we can use the syntax... Live, red palette, +, gobo1 palette... Which brings any fixtures that are above 0 int that are using the red and gobo1 palette into the programmer... If we could do that with programming that isn't necessarily live, like pull it outa cues, palettes, scenes or anything that might contain the specific programming etc. I think it would be a powerful tool.

    Sorry for not being clearer in my OP

    JB
Reply
  • 0
    Hey Scott,

    Thanks. But I'm referring to palette and or Value filtering.

    Like with "Live" we can use the syntax... Live, red palette, +, gobo1 palette... Which brings any fixtures that are above 0 int that are using the red and gobo1 palette into the programmer... If we could do that with programming that isn't necessarily live, like pull it outa cues, palettes, scenes or anything that might contain the specific programming etc. I think it would be a powerful tool.

    Sorry for not being clearer in my OP

    JB
Children
No Data

www.etcconnect.com