Hi, I have to work with some Robe Robin 800 and I want to control the different Cells. In mode 1 there are 3 different types 'beam, cell and motion'. What I have to do to control the different cells?
When you use the Robin 800, you must patch the different fixtureparts in the following order and user numbers. 1 - motion 1.1 - cell 1.2 - cell 1.3 - cell 1.4 - beam
After that you can control the cells with "dot + Next"... I recommend the mode 5. In this mode you dont need the beam fixturepart.....
When you use the Robin 800, you must patch the different fixtureparts in the following order and user numbers. 1 - motion 1.1 - cell 1.2 - cell 1.3 - cell 1.4 - beam
After that you can control the cells with "dot + Next"... I recommend the mode 5. In this mode you dont need the beam fixturepart.....
