Demo light DMX-profile has odd intensity control.

Are you allowed to share more details about the Demo-Light?

Something like:

- Manufacturer
- Product Name

And do you have a Manual that you can share?

Without knowing the Fixture, i still have a Picture in my head of how i could imagen it.

Maybe think of a Thungsten Color Scroller Unit that has CCT in the Scroller and a different LED-PAR Unit that somehow is mixed in.
A mixed Fixture where the LED has a virtual Int.

Are you allowed to share more details about the Demo-Light?

Something like:

- Manufacturer
- Product Name

And do you have a Manual that you can share?

Without knowing the Fixture, i still have a Picture in my head of how i could imagen it.

Maybe think of a Thungsten Color Scroller Unit that has CCT in the Scroller and a different LED-PAR Unit that somehow is mixed in.
A mixed Fixture where the LED has a virtual Int.

• It is a VERY basic light, used for film.

Manufacture is Aladdin, product Mosaic 4x4

https://aladdin-lights.com/media/
that has the DMX map and manual for the light.

I did try setting it up as a mixed fixture

.1 - physical Intensity and CCT

.2 - virtual intensity and RGB

but my issue is that because the single fixture now has 2 independent intensities, they won’t act as a ratio of one another.

So if I have the CCT at 25% and the RGB mix at 7%, and need to reduce the output by 3 points, the CCT now becomes 22% and the RGB mix becomes 4% (instead of the ratio change to 6.16%), which is a brand new color.

You could also make a Multicell Fixture (or Compound Fixture).

What i also ran into was the posibility of the Virtual Int for Colors.
https://www.youtube.com/watch?v=BR1FypZml_g&t=799s

Multicell Fixture are a little bit difficult with Hog4. As far as i know you can not create them yourself.
But you can make Compound Fixtures, but they are not the same.
Maybe you can still work around with this in mind.

Thank you for the ideas! I'll try it if I get the light back.

Mark