Losing Net3 node connection

I have a Eos Ti outputting SACN over a network to multiple 2 port DMX/RDM nodes.

For a while, I haven't been able to see one of the nodes in the console's NCE. I could control the fixtures connected to the node.

All of a sudden, recently, I've started losing control of the fixtures.

I haven't had a problem with any of the other nodes. The physical network hasn't been changed.

The node is powered POE. The fix has been to unplug the CAT5 to the node & reconnect. Once it powers up, it'll be good. Then without any notice, I'll lose control.

After reboot, I still won't see the node in the NCE.

Any thoughts??

Jeff

Parents Reply
  • All the other nodes are static, but as I haven't been able to see the problem node, I'm not sure about that one.

    I haven't had a chance to check it through Concert using Dan's suggestion, though. If that works, I'll be setting it to static, if that hasn't already been done.

    I do know that the EOS Ti's DHCP function is disabled.

    Jeff

Children
No Data
Related