Smartlink power supply with Smartpack wall mount dimmers

Hi,

When I use 3ea of Smartlink 5 button stations with Smartpack wall mount dimmers( 2ea of SL1210W, 1ea of SL620W),

do I need only one Linkpower Supply(like SL1210W-LPS) for the system?

or do I need linkpower supply for all three each dimmers?

There will be smartfade console, too.

I'd appreciate for any advice regarding.

thank you!

Parents
  • Hi Doo, 

    here is the Smartlink PSU Install Guide Link: 

    http://www.etcconnect.com/docs/docs_downloads/manuals/LinkPower_Supply_Kit_SetupGuide_revB.pdf

     

    You may have only one station power source on the SmartLink network. This source may be either the LinkPower Supply (S-LPS) or a SmartLink Station Power Module (S-SPM) which powers up to 16 SmartLink stations. As well, you may have up to four SmartLink host products in a SmartLink system. One SmartLink host product (SmartPack, SmartSwitch, Unison DRd with SmartLink or Sensor + with SmartLink) in the system must have a LinkPower Supply or Station Power Module installed for wall station power. 

    Your system above with 5x Stations and 3x Smartpack, needs just one PSU. 

     

    Have fun!

     


Reply Children
No Data
Related