Timeline PlayPosition UDPsend

Hi,

Do you want the position of the timeline streamed or just at points along the timeline?

Can you describe the application of this?

Tom

Hi Tom.
I will be enough points along the timeline.
I wanted to do this:
1. when starting the main timeline, run "system with the flag set to it"

2. Hang a trigger on the flag with the "run script" action

3. in the script, take a position and send this value by UDP

in the "HELP" did not find the description of sending UDP from the script.

I need to get feedback from the MSC on the remote control panel through MQTT-cloud

You will need to Enqueue this into a soft trigger to send the UDP message.

Don't quite understand you, why not use "Soft-trig" to run the script

if I use the "Send UDP" action in the trigger, then how can I bind the "POS" variable obtained from the script to the field?

You will need to just put a variable capture into it so <s> will send the value which is passed from your script as a string

Didn't quite understand you, you can link to the instruction or description of the moment?

Have a look at this file, hopefully it explains the steps - https://www.dropbox.com/s/beym585uzb3lygm/Sending%20Timeline%20position.md2?dl=0

I have tested this on hardware to check it works.

Tom

Thank you very much, Tom. Now everything became clear. Could you tell us more about any undocumented controller features?

I apologize, Tom, found a description of the solution to my problem in the "help".

Hi, No problem, glad you managed to find the information.
Do come back if you have more questions.

Hi, No problem, glad you managed to find the information.
Do come back if you have more questions.