CEM+ DMXA vs. DMXB input

fmengel
Posted: Wednesday, July 30, 2014 4:20 PM EditDelete Topic
Joined: 7/5/2014
Posts: 4

The question is can I set the CEM+ to accept input from both DMXA and DMXB as a Pile-On input. I.E. if either source states an ON level then the dimmer is set to the highest level? Example: DMXA: Dim 1 @ 100, Dim 2 @ 150; DMXB: Dim 1 @ 200, Dim 2 @ 50; Output: Dim 1 @ 200, Dim 2 @ 200.

Richard over 9 years ago

Bit late - Yes, this is the default when both are Enabled. If the DMXA and DMXB have the same Priority setting then they will HTP. If Priority is different then the greater Priority will win on all channels when both are present. Priority is either 20 (min) to 1 (max), default 10 or 1 (min) to 200 (max), default 100 depending on the firmware version.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel