• Date
    gd5
  • Date
  • Replies 5 replies
  • Subscribers 93 subscribers
  • Views 352 views
  • Users 0 members are here

Legacy Unison - 10 Button Station Programming

Hi

We have a legacy Unison system in one of our school lecture rooms. Unfortunately, all information who installed the system is lost and there appears to be no information attached to any of the kit. The "main" LCD control panel has long since been damaged and destroyed, we are left with 2 10 button stations and the controller. This would be fine but the presets on the buttons are not much use and subsequently I have been recalling presets from the controller. Is there a way on the controller to change these or will it have to be done through Light manager? 

Is there anything I can do here except try to find somebody who has legacy experience in our area?

For information we are in a school in Glasgow Scotland. 

Thanks to anybody who can help 

Graeme

I work in the IT department (Infrastructure) but because my background was AV instillation prior, I end up with these things lol. 

Parents

  • Hi Graeme,

    If you can get the config to us in Tech Support we can take a look and let you know the options. It is likely the record button for your presets was on the touchscreen so it might just be a case of needing to make of of the buttons on your button stations into this function and your can rerecord your own presets.

    If you are able to save the config from the Processor and email it to us we can take a look and let you know what is going on. You will however need a floopy disk and reader for this.

    If you use the email address for the tech support in Europe/Middle East & Africa found here we can see if we can help - Technical Support (etcconnect.com)

    Regards,

    Tom

  • in reply to tom mcguire

    Fantastic Thanks Tom, I will see what I can do, Fingers crossed the drive still works lol I know these are getting old.

    Regards

    Graeme

Reply Children
Related

www.etcconnect.com