• Date
    nickvincenty2
  • Date
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 27 views
  • Users 0 members are here

1/2 rack mount for P-TS7 touchscreen

Does anyone make a P-TS7 rack mount for a half-rack (9 1/2") space like those in a Stage Manager's desk? I've cut up lots of blank plates to do it but I'd rather have one I can just install. Or has anyone created a 3D printable one before I start going down that rabbit hole myself.

Parents

  • While there is a 19" Rack Mont version, I have never seen or had a request for a 9.5" version.  However if you really want one, contact an ETC dealer, as the ETC engineering department can create custom parts, but likely not going to be inexpensive.

    However if this is something in the future, as the Paradigm 5" screen comes out, that will fit in a standard 1 gang backbox and may be easier to find a stock plate for a half rack that could fit it.

Reply

  • While there is a 19" Rack Mont version, I have never seen or had a request for a 9.5" version.  However if you really want one, contact an ETC dealer, as the ETC engineering department can create custom parts, but likely not going to be inexpensive.

    However if this is something in the future, as the Paradigm 5" screen comes out, that will fit in a standard 1 gang backbox and may be easier to find a stock plate for a half rack that could fit it.

Children
No Data
Related

www.etcconnect.com