I've been trying a few things on a demo unit running the latest firmware.
I have one RGBW fixture patched. I have 'Preset 1' as that fixture at 100% and red. I have the startup behavior for the space as Preset 1.
If I cycle the power, it doesn't startup with that Preset. All levels are at 0.
ANSWER: It turns out there is a bug in the software. The only way for the startup preset to function is to be on an Echo bus. Even if there are no Echo devices, there has to be at least a E-SPS on the…
ANSWER: It turns out there is a bug in the software. The only way for the startup preset to function is to be on an Echo bus. Even if there are no Echo devices, there has to be at least a E-SPS on the bus.
Thanks for this info David as I just ran into this same issue. I can confirm it's still happening on software 3.0.1.6 if there is no Echo Bus on the system as well.
Hi all, this is fixed in version 3.1.0
Thanks Lowell! That's great news!