ColorSource Fixture Library

It seems that we overlooked putting a copy of the library content HTML on our website, we'll add that shortly.

In the meantime, it is attached to this post.ETC_ColorSource_Library_Contents_12_2_1.zip

Thank you Richard.
Could you please add the Chauvet Maverick MK2 Wash to the cue?
I have a customer that just purchased the console and would like a profile from ETC.
Let me know if there is any information I need to provide to make this happen.
Thank you.

Bob, I'm just about to write a profile for the MK2 Wash in 68 channel mode. If it is successful, I'll pass it on to you.

Hey wait, Bob, it's you! Haha, it's still early in the AM for me. I'm the one you requested the profile for !

Hello,

Just to let you know, the ColorSource console will not really control this fixture in 68-channel mode. It doesn't have the ability to control multiple cells of color (Blue 1, Blue 2, Blue 3....)

I would suggest that you use it in "Basic Mode" (20 channels) or "Advanced Movement Mode" (26 channels) or maybe one of the smaller modes.

At the moment, the only ETC console that can readily handle multiple cells of color is the Cobalt software.

Hello,

Just to let you know, the ColorSource console will not really control this fixture in 68-channel mode. It doesn't have the ability to control multiple cells of color (Blue 1, Blue 2, Blue 3....)

I would suggest that you use it in "Basic Mode" (20 channels) or "Advanced Movement Mode" (26 channels) or maybe one of the smaller modes.

At the moment, the only ETC console that can readily handle multiple cells of color is the Cobalt software.

Thank you, that was one issue that I thought I might come up against. I'll probably call into tech support soon. I'll switch gears now and go for a new mode.