Hi
I patched some generic IRGB fixtures for test on Offline v2.5
I set Intensity at 100 and R=128 G=0 B=0 and store to playback sequence
When I play this Intensity is changed to 49 !?! (R stays at 128 so output is not the same as stored)
If I set a lower R-value I-value will also be lower even though it is stored at 100 (R=5 results in I=2 !!)
Why this strange behavior ? Bug ?
My goal was to have one playback for intensity and one for color. E.G.
PB1: I=100 R=1 G=1 B=1
PB2: I=1 R=255 G=0 B=0
I figures this should work as all is HTP but ran into this problems...
Prohias