• Date
    Benajah
  • Date
  • Replies 1 reply
  • Subscribers 55 subscribers
  • Views 853 views
  • Users 0 members are here

Setting audio levels in cues.

Forgive me if this is obvious but I cannot find a way to set audio levels on a cue by cue basis. The audio volume level and media audio level seem to be master controls. They do not seem to be recorded in the cues. Any ideas how to set levels per cue?

Thanks

Parents

  • The "Record Level" fader in the Media > Audio tab sets the recorded media playback volume. It defaults to 70%.

    The Mixer (Input & Media) and Output Volume faders are 'live' mixing and master controls so you can adjust for a specific setup.
    - eg when touring the gain of the speaker system will vary, and during rehearsals you'll often want to dip or even mute all the audio.

Reply

  • The "Record Level" fader in the Media > Audio tab sets the recorded media playback volume. It defaults to 70%.

    The Mixer (Input & Media) and Output Volume faders are 'live' mixing and master controls so you can adjust for a specific setup.
    - eg when touring the gain of the speaker system will vary, and during rehearsals you'll often want to dip or even mute all the audio.

Children
No Data
Related

www.etcconnect.com