Touch OSC Template for ColorSource AV consoles?

ColorSource has the ability to be used remotely through the Amigo Web Browser App.

See link below for details.

https://www.manualslib.com/manual/1288630/Etc-Colorsource-20.html?page=65

I cant find a legitimate link for the Amigo Web Browser.  The first result opens a virus.  Nor is there an iOS app.  I switched to iOS when my last phone broke.  Don't currently have any Android devices on hand.

Hi Truth, Amigo is OS agnostic so Android vs iOS should not matter. The link is the IP address of the console and can be configured in setup 

The key being "web browser" here, launch you mobile device/computer's web browser and navigate to the IP address of the ColorSource AV console.

Better: Scan the QR code and open the link.

Setup > Settings

While on the subject of Amigo - It’s a a great idea making it ‘OS Agnostic’ (nice one, Lowell ) but don’t expect it to mirror exactly what you see on the console screen. There is far more functionality than most remote units but there is inevitably some lag in response. I have yet to discover what the Clear button does and it’s a pity the tagging half of the Quick Select isn’t there, it’s far more useful than the zones display which relies heavily on how you distort the stage map to suit its whims.

Just a further thought on Amigo - when you are using it as a remote control on a tablet or phone using a small router as a wireless access point there is a distinct possibility of losing connection as you walk further from the router. It would be good to have something moving on the page to show the connection is still active. As a workaround, patch a dummy dimmer channel and apply to it a flashing intensity effect. This should flash on the stage map while the connection is active.

Just a further thought on Amigo - when you are using it as a remote control on a tablet or phone using a small router as a wireless access point there is a distinct possibility of losing connection as you walk further from the router. It would be good to have something moving on the page to show the connection is still active. As a workaround, patch a dummy dimmer channel and apply to it a flashing intensity effect. This should flash on the stage map while the connection is active.