Chauvet Colordash Par-H12 IP and Colorsource 40

I recently purchased 4 Chauvet Colordash Par-H12 IP to use with my ETC Colorsource 40. First, after trying to add a device RDM was not picking up the fixtures so I did a manual load from the Library, but I can't get anything to work, intensity or color changes. DMX addresses and footprint are set correctly. Is there something I am not setting correctly.

Please help

Parents

0 LowellOlcott over 5 years ago

Hi Derick, sorry for the delay in response. There are a few things that might be causing this issue. Would you mind giving our technical support group a call? Contact info for your region can be found here: https://www.etcconnect.com/Support/Contact-Us.aspx

Thanks!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 LowellOlcott over 5 years ago

Hi Derick, sorry for the delay in response. There are a few things that might be causing this issue. Would you mind giving our technical support group a call? Contact info for your region can be found here: https://www.etcconnect.com/Support/Contact-Us.aspx

Thanks!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data