1 If a fader is left on when the console is put into hibernation mode the light will stay on.
2 When the power is disconnected and the console restarts and all the faders are down a light will come on in the rig and follow the colour changes on the console as it starts up.
Still having problems with the ColorSource 20. Last show all 5 spot lights stopped working, reset the faders and after a few minutes they stated working again. One elation spar light that was not being used came on and stayed on all show had the physically disconnect power after the show. One Elation FuzePar stopped working for a while then started working. So how can we fix the problem?