• State Suggested Answer
  • Date
    PBo67
  • Date
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 55 subscribers
  • Views 828 views
  • Users 0 members are here

CS personality editor 3.2.1.4

Hello ,

II use the personal editor, where I only modified the HOME position of the PAN parameter of an existing fixture. Now compared to the parameters I started with, the HOME has changed a lot, it's ok. But the colors on the screen and buttons are completely wrong. The projector operates normally.
What is this bug again?

Thanks

Parents
  • 0

    This is CSCON-49401 - RGB and RGBx Fixtures created or edited appear blue or purple when homed to full.
    Workaround: to fix profiles created by version 3.2.0, open the calibration menu and move All at Full closer to the center (white) then hit accept. At this point the software recalculates the All At Full and the fixture will be closer to the original library fixture.

    It has been corrected in CS/ET Personality Editor 3.2.1.5 onwards.

    However, it looks like the release build of CS/ET Personality Editor 3.2.1 has not yet been posted, we'll get this updated shortly.

Reply
  • 0

    This is CSCON-49401 - RGB and RGBx Fixtures created or edited appear blue or purple when homed to full.
    Workaround: to fix profiles created by version 3.2.0, open the calibration menu and move All at Full closer to the center (white) then hit accept. At this point the software recalculates the All At Full and the fixture will be closer to the original library fixture.

    It has been corrected in CS/ET Personality Editor 3.2.1.5 onwards.

    However, it looks like the release build of CS/ET Personality Editor 3.2.1 has not yet been posted, we'll get this updated shortly.

Children
Related

www.etcconnect.com